Firefighter like hose with valve

[SovietTiger]

This is a very specific idea that I have, that needs a very specific prop. I don't know if in the sea of all the H5 objects there's a hose (ok José) with a valve, but like the ones the firemen use. No, is not for a fireman/woman, no it is not intended for anything innocent and cute. Let's say someone needs to know something, like, the CIA, and needs to ask not so nicely to, say, a mujaheddin...  

I haven't looked for it in the mesh sites, because from time to time it results in somebody who has had the same idea. Or if someone knows where I can get one, I can make the H5 object or the regular toy.

Thanks for your attention. As you were. 

[MarkZappa]

10 hours ago, SovietTiger said:

I don't know if in the sea of all the H5 objects there's a hose (ok José) with a valve, but like the ones the firemen use

You might as well try looking at Sketchfab as there you have a few examples of free assets that you could convert into h5m in less than one minute 

Valve: https://sketchfab.com/3d-models/fireman-hoses-03-2c5e62a4faae471398575fedc2cc1645

Hose: https://sketchfab.com/3d-models/hose-59aea49fd76b4a99af38aac51bb7fe46

Rolled Hose: https://sketchfab.com/3d-models/firefighter-vision-water-attack-hose-dcc25b114cdc4d8da2ce7a9b719cc829

You can also try with this mechanical hose quadruped robot so you don't need nobody to operate the hose: https://sketchfab.com/3d-models/mechanical-fire-hose-robot-e9f94a19b8e541618fcf2203a692862e

In the first case, with just the valve you can easily create the hose in Blender by starting a curve with your 3D cursor located at the rear edge of the valve, beveling such curve from geometry tab in object data properties and finally convering it to mesh; thus you can make a UV map and texture it

EDIT: There you go, I did it for you, now "hosie" the hose is ready for you; but are you ready for her? This is just a starting point of course, textured ready to import as h5m for toy you going to have to perform the required actions! I'll attach the blend file for you

https://www.mediafire.com/file/li3kvzw1ynq6l5d/HosieTheHose.zip/file

Remember to credit the author of the tip; I've only done the hose here

 

[Morius]

@sadekhnd is a seasonal bird that immigrates to here from time to time, but he would perfect to help on this.

Also, @Sexvision could be of help too (and then we do that revolver thingy).

[HDiddy]

8 hours ago, SovietTiger said:

This is a very specific idea that I have, that needs a very specific prop. I don't know if in the sea of all the H5 objects there's a hose (ok José) with a valve, but like the ones the firemen use. No, is not for a fireman/woman, no it is not intended for anything innocent and cute. Let's say someone needs to know something, like, the CIA, and needs to ask not so nicely to, say, a mujaheddin...  

I haven't looked for it in the mesh sites, because from time to time it results in somebody who has had the same idea. Or if someone knows where I can get one, I can make the H5 object or the regular toy.

Thanks for your attention. As you were. 

Sometime you have to release a little funds to get what you want.   Check CGTrader there are a ton of hose and valve meshes ranging from cheap to pricey

https://www.cgtrader.com/search?keywords=hose

[SovietTiger]

2 hours ago, MarkZappa said:

You might as well try looking at Sketchfab as there you have a few examples of free assets that you could convert into h5m in less than one minute 

Valve: https://sketchfab.com/3d-models/fireman-hoses-03-2c5e62a4faae471398575fedc2cc1645

Hose: https://sketchfab.com/3d-models/hose-59aea49fd76b4a99af38aac51bb7fe46

Rolled Hose: https://sketchfab.com/3d-models/firefighter-vision-water-attack-hose-dcc25b114cdc4d8da2ce7a9b719cc829

You can also try with this mechanical hose quadruped robot so you don't need nobody to operate the hose: https://sketchfab.com/3d-models/mechanical-fire-hose-robot-e9f94a19b8e541618fcf2203a692862e

In the first case, with just the valve you can easily create the hose in Blender by starting a curve with your 3D cursor located at the rear edge of the valve, beveling such curve from geometry tab in object data properties and finally convering it to mesh; thus you can make a UV map and texture it

EDIT: There you go, I did it for you, now "hosie" the hose is ready for you; but are you ready for her? This is just a starting point of course, textured ready to import as h5m for toy you going to have to perform the required actions! I'll attach the blend file for you

https://www.mediafire.com/file/li3kvzw1ynq6l5d/HosieTheHose.zip/file

Remember to credit the author of the tip; I've only done the hose here

 

Es Usted un Sol, la luz al final del túnel, el hijo de...l Río de la Plata que va a facilitar algo que se viene cocinando desde antes de la pandemia.

I'm gonna modify the 'manguera' (manguito con chile, anyone?) because I need it hanging over a certain point from the ceiling, but obviously working from something already started is easier than doing it from scratch. 

Credit would be to Drewart by creating the asset Fireman Hoses 03 to this license, correct?

Thank you!!! 

 

[MarkZappa]

10 minutes ago, SovietTiger said:

Credit would be to Drewart by creating the asset Fireman Hoses 03 to this license, correct?

Thank you!!! 

Exactly, even though I would proceed with a single "credit to the respective author of the mesh" as some people would probably don't like for their models to be featured on a porn game

You just know, pornography is like a dark spot that nobody wants to be related with; for example I still have a 1973 Cadillac ElDorado cabriolet with a readme file that says "explicitly forbidden for commercial use and pornographic material" hence user will not be credited but source (to prevent author tantrums)

You can also credit the site as credit "Sketchfab"

[SovietTiger]

4 minutes ago, MarkZappa said:

Exactly, even though I would proceed with a single "credit to the respective author of the mesh" as some people would probably don't like for their models to be featured on a porn game

You just know, pornography is like a dark spot that nobody wants to be related with; for example I still have a 1973 Cadillac ElDorado cabriolet with a readme file that says "explicitly forbidden for commercial use and pornographic material" hence user will not be credited but source (to prevent author tantrums)

You can also credit the site as credit "Sketchfab"

Itero y reitero: es Usted un crisol. La voz cantante desde el pináculo de la palestra.

[MarkZappa]

4 hours ago, SovietTiger said:

Itero y reitero: es Usted un crisol. La voz cantante desde el pináculo de la palestra.

Ah ya, que no es para tanto! Mierda! Usted me hace emocionar (?)

[Sexvision]

On 3/1/2024 at 4:08 PM, SovietTiger said:

Es Usted un Sol, la luz al final del túnel, el hijo de...l Río de la Plata que va a facilitar algo que se viene cocinando desde antes de la pandemia.

I'm gonna modify the 'manguera' (manguito con chile, anyone?) because I need it hanging over a certain point from the ceiling, but obviously working from something already started is easier than doing it from scratch. 

Credit would be to Drewart by creating the asset Fireman Hoses 03 to this license, correct?

Thank you!!! 

 

sketchfab has a button to copy the license information. You can find it here: